Methanol
(CH3OH)
Smart Sensor SA1-CH3OH
Model SA1 smart sensor modules are designed to detect and monitor various gases in ambient air. The modules consist of a target specific gas detection sensor and a microprocessor-based signal conditioning circuit. Both are housed in a metallic enclosure fitted with gold plated connecting pins. The “Smart Sensor Module” is factory programmed for a specific gas and range of sensitivity. On power up the gas type, measurement range and previous zero and span calibration data points are read by the transmitter facilitating a fully automated startup. The modules can be used with any of Safeguard Analytics gas detection transmitters.
Electrochemical
Detector Type: Non-Dispersed Infrared (NDIR)
Detection Method: Diffusion
Range of Sensitivity: 0-100 PPM
Response Time: T60 ≤ 30s
Accuracy: ± 2 % of Reading
Zero Drift: < 2% per month
Span Drift: < 2% per month
Temperature Range: -40°C to +50°C; -40°F to 122°F
Humidity Range: 15% to 90% RH non-condensing
Pressure Range: 1 Atm ± .1
Input Power: ~ 3.5 to 5 VDC
Power Consumption: 2.64 milliwatts
Detector Life Expectancy: >2 Years
Detector Warranty: 1 Year
Non-Dispersed Infrared
Detector Type: Non-Dispersed Infrared (NDIR)
Detection Method: Diffusion
Range of Sensitivity: 0-100% LEL
Response Time: T90 ≤ 30s
Accuracy: ± 2% of FS
Zero Drift: < 2% per month (In clean air)
Span Drift: < 2% per month (In clean air)
Temperature Range: -30°C to +60°C; -22°F to 140°F
Humidity Range: 0% to 95% RH non-condensing
Pressure Range: 1 Atm ± .1
Input Power: ~ 3.5 to 5 VDC
Power Consumption: <280 milliwatts
Detector Life Expectancy: >5 Years
Detector Warranty: 5 Years
Coming Soon